Slab foundation building in Fullerton CA - a slab with the plumbing planned first
Building a new home or adding on and need the slab under it? We plan, form and pour a foundation that holds up.
I measure and price it myself
I come out to look at the job myself, measure it and write your estimate. Our own crew does the pour and I run it on site, so the person who priced it is the one making sure it gets built that way.
In business since 2020, city-crew trained
I learned concrete on a city public works crew, pouring sidewalk, curb and driveway aprons day after day. I started this business in 2020 to bring that same care with the ground, forms and joints to homeowners and property owners.
Licensed and fully insured on every pour
We're licensed and fully insured. Our work is satisfaction guaranteed. I'd rather give you a fast, honest no than a slow maybe, so call (657) 354-1060 and I'll tell you straight whether we're the right crew for your slab.
Slab foundation building in Fullerton
A slab foundation is a concrete foundation that rests right on the ground under a home. We build slab foundations in Fullerton for owners putting up a new house, an addition or a garage, and we form, pour and finish the concrete so it's ready for framing.
The first choice is the kind of slab. A post-tensioning trade group says post-tensioned slabs, which have steel cables pulled tight inside so the concrete stays squeezed, suit homes on soil that swells and shrinks, because that squeeze resists the ground moving. A nearby city's building handout notes that most of Orange County falls in a high earthquake design category and some areas have that swelling soil, so raise both with your designer before the slab type is set.
Price moves with the size of the slab, the base work under it, and whether the steel inside is rebar, bars that hold the concrete together, or post-tensioned cable. The schedule turns on getting plans drawn and the permit issued, then the days after the pour while the concrete hardens. When the job needs a permit from the city's Building & Safety Division, we pull it ourselves and keep you posted. I'll put your figure in writing after I see the site.
Slab foundations, from the ground up to the finish
Plumbing and openings settled first
We pin down the plumbing and every floor opening before the pour, so nobody has to cut into the slab later. Drains, pipe sleeves and openings get checked against the plans while the forms are still open, because that's when a fix costs nothing but a little time. If the slab is post-tensioned, that planning matters even more. When your plans call for footings and walls instead of a slab on the ground, we build that through our foundation installation work with the same check before any concrete goes in.
A packed base under every slab
The subgrade, the ground the slab sits on, gets dug out and packed, not raked level, because loose dirt settles and takes the slab with it. Federal indoor air guidelines recommend a drainage pad of gravel, or sand with fabric matting, under a slab so ground moisture can't wick up into it. The base is buried on day one, so it's the first thing people want to cut from a budget. I won't cut it, because it decides how the slab holds up. It's the same base work we put under a concrete parking lot.
Joints and pour timing that control cracks
Some cracking happens on every slab, and the national design guide for slabs says that isn't necessarily a sign of poor work, so what matters is where cracks go and how tight they stay. We pour early, because midday heat can leave a weak, dusty top, and we cut control joints, shallow lines that give the slab a chosen place to crack, on time instead of late. The same trade group says post-tensioned slabs crack less and keep cracks tight, which keeps out water that can ruin flooring and cause mold.
Get a written estimate for your slab foundation
We reply within one business day to set a time, and I come out to measure and give you a free written estimate with no obligation. Have your address, slab size in square feet and any plans handy.
(657) 354-1060What a slab job looks like with us
Call or send the form
You call (657) 354-1060 or send the form, and I come out myself to look the job over and measure. I tell you on the spot what I'd build and why, then you get a written estimate.
Paperwork, ground and forms
We line up any city paperwork, and if we're not sure what the city wants, we ask the office before we give you a price. Then our crew digs out and packs the base and sets the forms to your plans.
Pour, finish and clean up
Our crew pours and finishes the slab with me on site running it. It needs time to cure, to harden and gain strength, before heavy loads go on, and we leave the street and gutter as clean as we found them.
Slab foundation questions from Fullerton owners
How much does a concrete slab cost in Orange County?
A reinforced concrete slab in Orange County usually costs about $8 to $14 per square foot. That's the going rate around the county, not our price, and it doesn't include staining or stamping, so a decorative finish adds to it. For a number on your own foundation, I'll come out, measure and give you a written estimate.
How soon can I walk on or load a new slab?
A new slab should be walkable within 48 hours. One cost guide suggests waiting about a week before putting heavier loads on it, and concrete takes about a month to fully cure. Build that wait into your framing and delivery schedule so nothing heavy lands on the slab too soon.
Who draws the plans for a slab permit in Fullerton?
For most projects, Fullerton requires plans prepared by a California licensed architect or engineer, and the city's staff don't draw plans. Line up a designer before you apply. The city's permit document list includes a foundation plan, structural details and calculations, though not every item is needed for every job.
Can I cut into a post-tensioned slab later?
Not without finding the cables first. One post-tensioning company warns that cutting a stressed tendon, one of the tight steel cables inside, releases its force all at once and can hurt people, so every later hole needs a qualified scanning contractor to locate the tendons. That's why we settle openings before the pour.