Stamped concrete services in Fullerton CA - the look of stone or brick on a solid base
Tired of plain gray concrete out back? We pour, color and stamp a slab that looks like stone or brick and sits on packed ground.
I price it and run it
I come out to look at your job, measure it and write the estimate myself. Our own crew does the work and I run it on site, so the person who priced your slab is the one watching the stamp go down.
Trained on a city crew
I learned concrete on a city public works crew, pouring sidewalk, curb and driveway aprons day after day. I started this business in Fullerton in 2020 to bring that same careful flatwork, the patios, walks and driveways that sit on the ground, to homeowners.
A fast, honest answer on your job
We're licensed and fully insured. If stamped concrete isn't right for your space, I'd rather give you a fast, honest no than a slow maybe. Call (657) 354-1060 or send the form on this page to set up a visit.
Stamped concrete services in Fullerton
Stamped concrete is a regular poured slab that we color, press with a pattern so it looks like stone, brick, wood or tile, and then seal. It suits Fullerton homeowners who want a patio, walk or driveway that looks dressed up without laying pavers one by one.
The first big choice is color. Integral color is mixed into the whole batch, so it runs the full depth of the slab and a chip or a saw cut shows the same color as the top. You give up the deepest and brightest tones for that. On a walk or driveway that takes daily knocks, I'd rather have a softer color than pale scars, and I'll tell you why on site.
Price moves with the size of the area, the pattern and color you choose, how much digging and base work your ground needs, and whether the slab gets reinforcing steel, since reinforced stamped work costs more. The schedule turns on that prep, on getting the stamping done while the concrete is still soft, and on curing, the wait before you use it so the concrete can harden. The written estimate I give you lays out what I'd build and why.
Stamped concrete, from the base to the sealer
Color, pattern and hidden joints
We pick the color and pattern with you first, since the forms, the joints and the pour all get planned around them. Control joints are grooves we cut so the slab cracks along a line we chose instead of across the middle, and we hide them in the pattern's lines so they blend in. I'll be upfront that the sealer needs redoing now and then. We can add grit to it so the surface isn't slick when it's wet, which matters by a back door or a pool gate.
What goes under the pattern
The part nobody sees decides how a stamped slab holds up. It needs a packed base, the right thickness for what it carries, and rebar, the steel bars inside the slab, sized to the job. So we dig out, pack the ground, check where the water runs so the slab falls away from your house, and set the forms before any color shows up. When a budget gets tight, people want to cut the base first because it's hidden on day one. I'd go to a simpler pattern before I'd skimp there.
Driveway aprons and street-side work
If your stamped driveway or walk runs out to the street, part of it may sit in the public right-of-way, which the city says typically includes streets, parks and easements for its sewer, water and storm drains. Most work there needs an encroachment permit, and widening or replacing a driveway approach needs the Engineering division's approval. We pull that permit ourselves. Often that stretch is a plain, brushed walk, so we handle concrete sidewalk building alongside the stamped work, and we can pour the garage floor concrete where the driveway meets the garage.
Get a free on-site estimate for your stamped slab
We reply within one business day to set a time, and I come out myself to measure and look the ground over. The estimate is free, comes in writing and carries no obligation.
(657) 354-1060How a stamped concrete job goes
Call or send the form
Call us or send the form with the project type, rough square footage and a few photos of the area. I come out myself, measure, and tell you on the spot what I'd build and why, then you get it in writing.
City paperwork and ground prep
We line up any city paperwork first and keep you posted on where it stands. Then our own crew digs out, packs the base and builds the forms, and I'm on site running it.
Pour, stamp, seal and clean up
On pour day we color the concrete and press the pattern in with rubber mats while it's still soft. Once it's cured and sealed, we leave the street and gutter as clean as we found them.
Stamped concrete questions from Fullerton homeowners
How much does a stamped concrete patio cost in Orange County?
A stamped concrete patio in Orange County usually costs about $9 to $18 per square foot. That's the going rate for patios around here, not our price, and it doesn't cover driveways or walks. I measure on site and give you a written estimate with your real number.
Does stamped concrete need to be sealed, and how often?
Yes, sealing is a required step, because the sealer protects both the color and the surface of a stamped slab. One installation guide advises resealing every 2 to 3 years, so put it on your list as regular upkeep, not a repair.
Will stamped concrete crack like my old slab did?
It can, because stamped concrete cracks for the same reasons any slab does. That's why it needs control joints, which we tuck into the pattern lines, and why we put the effort into a packed base first. Done that way, a crack has a place to go that's hard to pick out.
Does my concrete contractor need a California license?
Yes, for most jobs. In California, anyone who contracts for work worth $1,000 or more in combined labor and materials needs a current, valid license from the state licensing board, and the same goes for jobs that need a building permit or use employees. Ask to see it before you sign.